LONGSHINE MICROSYSTEM, INC.

LCS-6624U, LCS-6624UG VER. 2

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  Game port                                               CN1

  40-pin IDE (AT) Interface connector                     CN2

  34-pin control cable connector - floppy drive           CN3

  10-pin serial port 2 -internal                          CN4

  9-pin serial port 1 - external                          CN5

  25-pin parallel port                                    CN6

  2-pin connector - drive active LED                      JP1

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Serial port 1 enabled                  JP2             Pins 1 & 2
                                                              closed

      Serial port 1 disabled                 JP2             Pins 2 & 3
                                                              closed

  »   Game port enabled                      JP3             Pins 1 & 2
                                                              closed

      Game port disabled                     JP3             Pins 2 & 3
                                                              closed

  »   Primary floppy drive address           JP4             Pins 1 & 2
      selected                                                closed

      Secondary floppy drive                 JP4             Pins 2 & 3
      address selected                                        closed

  »   Parallel port is LPT2                  JP5             Pins 1 & 2
                                                              closed

      Parallel port is LPT3                  JP5             Pins 2 & 3
                                                              closed

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   IDE port enabled                       JP6             Pins 1 & 2
                                                              closed

      IDE port disabled                      JP6             Pins 2 & 3
                                                              closed

      Serial port 2 enabled                  JP7             Pins 1 & 2
                                                              closed

      Serial port 2 disabled                 JP7             Pins 2 & 3
                                                              closed

  »   Primary address for serial             JP8             Pins 1 & 2
      ports selected                                          closed

      Secondary address for serial           JP8             Pins 2 & 3
      ports selected                                          closed